Press Shop

Braeburn has a SMS 2500 ton hydraulic press that is computer programmable with a rotating upper die. It has a 42 inch die width and has daylight of 72 inches between upper and lower dies. Our integrated press manipulator has a lifting capacity of 16,000 pounds. In addition, we have a new charge/manipulator which has a lifting capacity of 50,000 pounds.

Our minimum thickness on forged flat slab is 4 inches with the maximum width of 40 inches. We forge round bars and round cornered squares in sizes from 8" through 25". Bar lengths can vary with sizes and weights, but we have furnaces and a water quench tank that will handle 20 foot lengths. We have 10 heating furnaces at the press, and five are capable of holding plus or minus 250 F.